Is My 2022 Toyota Tundra Included in the Engine Recall?

Non-hybrid 2022–2024 Toyota Tundra models powered by the gas-only i-FORCE 3.4-liter twin-turbo V6 engine and manufactured through August 2024 are included in the safety recall. The campaign specifically targets conventional gas powertrains, while trucks equipped with the i-FORCE MAX hybrid powertrain are excluded. Owners are being contacted by Toyota in phases via first-class mail, so truck owners can watch for official safety recall notifications.

Toyota identified that specific gas-powered third-generation Tundra pickups produced between the start of the 2022 model year and August 2024 require safety recall inspections. Vehicles built after August 2024 are not included in this campaign. If you operate a non-hybrid Tundra from the 2022, 2023, or early 2024 model years, your pickup is likely within the recall population.

Truck owners driving across Victorville routes can easily verify their safety recall status before waiting for mailed notices. By locating the 17-digit Vehicle Identification Number stamped on the driver-side door jamb or visible through the lower corner of the windshield, owners can check open safety campaigns online. Our team at Valley Hi Toyota can also run your vehicle identification number directly through the factory system to confirm whether your pickup is identified for recall service.

If your vehicle requires recall service or routine maintenance, you can review our High Desert service center address to plan your visit or give our service advisors a quick call at (866) 632-6290 for immediate status updates.

Table of Contents

• What Specific Engine Defect Is Causing Failures in 2022-2024 Toyota Tundra Trucks?
• What Are the Specifications of the Recalled i-FORCE 3.4-Liter Twin-Turbo V6 Engine?
• What Does the Dealer Inspection and Engine Replacement Process Involve?
• Will Toyota Provide Free Loaner Vehicles or Rental Reimbursements During Repairs?
• Frequently Asked Questions About the 2022-2024 Toyota Tundra Engine Recall
• Schedule Your Tundra Recall Inspection and Maintenance at Valley Hi Toyota

What Specific Engine Defect Is Causing Failures in 2022-2024 Toyota Tundra Trucks?

The safety recall stems from metallic machining debris that was inadvertently left inside the engine crankcase during the factory manufacturing process. This microscopic debris can migrate through internal oil passages, settling between the crankshaft main bearings and journals under normal operation. Over time, the debris causes severe bearing wear, leading to engine knocking, rough running, sudden power loss, or potential engine seizure while driving.

During high-load operation or sustained highway driving, contaminated engine oil prevents proper hydrodynamic lubrication at the main bearings. As the main crankshaft bearings deteriorate from abrasive metallic shavings, clearance between moving components increases. Drivers often experience early warning indicators such as unusual engine noise, severe mechanical knocking, illumination of the check engine light, or oil pressure warnings on the instrument cluster.

If left unaddressed, main bearing failure can cause the engine to stall unexpectedly, resulting in a sudden loss of motive power at highway speeds. Federal safety regulators flagged this condition because unexpected engine stalling increases crash risks in traffic. Factory-trained service technicians address these mechanical defects through comprehensive diagnostic protocols established by Toyota engineers.

Maintaining clean oil lubrication pathways is critical for twin-turbocharged engines. When servicing your truck, utilizing components from a genuine Toyota parts department helps ensure proper oil filtration and system pressure protection throughout your vehicle’s service life.

​

What Are the Specifications of the Recalled i-FORCE 3.4-Liter Twin-Turbo V6 Engine?

The engine featured in the safety recall is the V35A-FTS 3.4-liter twin-turbo V6, an all-aluminum engine displacing 3,445 cc with double overhead camshafts and 24 valves. Utilizing dual VVT-i variable valve timing and twin single-scroll turbochargers paired with air-to-liquid intercoolers, this gas-only powertrain generates between 348 hp and 389 hp along with 405 lb-ft to 479 lb-ft of torque depending on trim level and cab configuration.

Engineered for full-size truck capability, the twin-turbo V6 delivers linear torque early in the rev range through a standard ECT-i 10-speed automatic transmission. On properly equipped gas models, this engine supports a maximum towing capacity of up to 12,000 lbs and a maximum payload capacity of approximately 1,940 lbs. These heavy-duty ratings make the truck a frequent sight pulling equipment trailers through Hesperia and surrounding desert work sites.

• Engine Code: V35A-FTS 3.4-liter twin-turbo V6 (3,445 cc)
• Architecture: Aluminum block and cylinder heads, DOHC 24-valve layout with dual VVT-i
• Induction: Twin single-scroll turbochargers with integrated intercooling
• Standard Horsepower: 348 hp @ 5,200 rpm (SR trim) or 389 hp @ 5,200 rpm (SR5, Limited, Platinum, 1794)
• Standard Torque: 405 lb-ft @ 2,000 rpm (SR trim) or 479 lb-ft @ 2,400 rpm
• Transmission: 10-speed automatic transmission with sequential shift mode
• Maximum Capabilities: Up to 12,000 lbs max tow rating and 1,940 lbs max payload

While the hybrid i-FORCE MAX variant adds an electric motor-generator to produce 437 hp and 583 lb-ft of torque, its unique assembly environment and hybrid operation profile exempted it from the machining debris issue that affects the gas-only V35A-FTS configuration.

​

What Does the Dealer Inspection and Engine Replacement Process Involve?

The official recall remedy involves a multi-step inspection by factory-certified technicians using specialized diagnostic software to evaluate crankshaft bearing health. If the inspection software or drive-data analysis reveals bearing damage or unacceptable operational parameters, Toyota provides a factory replacement engine short-block assembly at no charge when replacement is required.

When a truck arrives at the dealership for recall service, technicians connect Toyota diagnostic tools to scan ECU history and analyze engine acoustic and performance telemetry. If the engine shows signs of debris contamination or main bearing failure, the entire engine assembly is removed from the chassis. A factory-fresh engine core—manufactured under strict updated engine cleaning controls—is installed along with new gaskets, seals, fluids, and filters.

When Tundra owners bring their trucks into our service drive, they usually ask whether the engine replacement uses refurbished components before asking about repair turnaround time. We explain that approved repairs use Toyota parts and procedures intended to restore proper operation.

Every replacement engine comes backed by Toyota factory quality standards, ensuring your truck retains its original performance, towing capability, and resale confidence. For owners performing standard maintenance or repair upgrades, ordering OEM Toyota components guarantees proper fitment and long-term durability.

​

Will Toyota Provide Free Loaner Vehicles or Rental Reimbursements During Repairs?

Loaner or rental vehicles may be available to owners while their Tundra is undergoing recall inspection or complete engine replacement service. Because an engine replacement requires extensive shop time, dealership service departments arrange alternative transportation so your daily routine or work schedule remains uninterrupted.

In situations where a dealer service department experiences high service volume and temporary loaner vehicles are fully allocated, Toyota may offer rental reimbursement assistance for eligible owners, subject to current program terms. Customers should contact the dealership or Toyota for details about reimbursement availability and eligible expenses.

• Loaner Vehicles: May be available through the authorized dealership service department during recall repairs.
• Expense Reimbursement: May be available for eligible rental car charges when dealership loaners are unavailable.
• Coverage Scope: Applies to affected vehicles as determined by Toyota recall eligibility.
• Customer Cost: Eligible recall repairs are performed at no charge to the owner.

To ensure seamless loaner availability or quick rental approval, owners should coordinate directly with their service advisor when scheduling their safety recall appointment.

​

Frequently Asked Questions About the 2022-2024 Toyota Tundra Engine Recall

Q: How do I verify if my specific 17-digit VIN is subject to the Tundra engine recall?

Owners can check their safety recall status by entering their 17-digit Vehicle Identification Number into the official Toyota recall lookup tool or the NHTSA recall database online. Alternatively, you can call our service department directly, and a service advisor will run your VIN through the factory database to confirm open campaigns instantly.

Q: Are 2024 Toyota Tundra trucks manufactured after August 2024 part of this recall campaign?

No, Tundra models produced after August 2024 are excluded from the safety recall. Toyota updated its engine manufacturing and clearing processes on assembly lines by August 2024 to ensure complete removal of machining debris, eliminating the root cause for later production models.

Q: Why are i-FORCE MAX hybrid Tundra models excluded from the safety recall?

The i-FORCE MAX hybrid powertrain uses a distinct assembly and component integration flow that was not affected by the specific machining debris condition found in the gas-only engine production line. As a result, federal safety regulators and Toyota determined that hybrid models do not share the main bearing failure risk.

Q: How long does the complete engine replacement service take once my truck is in the service bay?

While diagnostic software inspections take only a short time, a complete factory engine replacement typically requires an estimated timeframe that may vary based on parts availability and repair conditions, though timing may vary. Loaner vehicles may be available, subject to dealership and program availability, to help customers remain mobile during the repair process.

Q: What safety risks prompt NHTSA safety recall notifications for engine stalling?

Machining debris can cause main bearing wear, leading to sudden engine knocking, power reduction, or engine seizure. An engine seizure while traveling at high speeds results in a sudden loss of motive power, which increases the likelihood of a crash in highway traffic.

​

Schedule Your Tundra Recall Inspection and Maintenance at Valley Hi Toyota

Addressing open safety recalls promptly ensures your truck remains dependable, safe, and ready for work or outdoor travel. Our factory-trained service technicians at Valley Hi Toyota possess the specialized diagnostic equipment, software tools, and technical expertise required to perform thorough recall inspections and authorized engine replacements.

Because Toyota is notifying owners in gradual phases, you can check your recall status if you suspect your truck is affected. Our service team can look up your vehicle identification number, confirm campaign eligibility, order required factory components, and ask about service loaner availability for your appointment day.

Beyond recall service, keeping up with routine maintenance—including regular oil changes, filter replacements, and brake inspections—preserves your pickup’s performance and long-term durability. We invite local truck owners to stop by our service center location on Valley Center Drive, speak with our team by calling (866) 632-6290, or contact us today by scheduling your recall service appointment online.

© 2026 Valley Hi Toyota. All rights reserved.